Reasons Why Your Nissan Qashqai Key Fob Won't Work
The Qashqai's greater dimensions give it a distinct SUV-like feel. Its ride on 19-inch alloy wheels in Ti and STL versions can also be a bit firm. Its front tyres can also lose grip on rough surfaces and its CVT might occasionally exhibit wrist-flexing torque steer.
This is typically caused by a dead coin battery which is easily replaced in just a few minutes. Make sure the replacement battery is of the same voltage, size and specifications.
Water Damage
Water damage is one of the most common causes for an Nissan keyfob to display the "key ID wrong" message. The key fob is fitted with rubber seals that protect the electronic chip inside, however prolonged exposure to moisture can cause it to cease functioning properly. It's common to see this happen if your key fob has been dropped into the water or a swimming pool. However, it could also occur when it's wet due to rain or soapy hand.
If your key fob is exposed to water for a lengthy period of time, it could need to be cleaned using isopropyl alcohol or electronic cleaner. In addition, it may require taking to a specialist to repair or replace it.
If your key fob need to be replaced the process is easy. Make sure you have the proper multipack (CR2032 3V). Open the back and front cases with the help of a small screwdriver. Remove the metal clips, then remove the old battery and replace it. Reassemble the fob and replace the mechanical key. Check to see if it functions properly. If not then you'll need to take it to an Nissan dealer or professional auto locksmith for the replacement of the chip in the key. The chip isn't usually damaged by water so it shouldn't be too expensive.
Dead Coin Battery
The coin battery is another common reason that your Nissan Qashqai remote key fob may not work. These batteries usually last 3-5 years, but they may fail over time, particularly if the fob is dropped frequently. You could replace the battery but make sure it is the same voltage and same size as the first. If you use a new battery, it may cause the key to be assigned a wrong key ID. This will prevent it from being paired with your vehicle.
The most efficient method of replacing the battery in the Nissan Qashqai key fob is by removing the fob with the small screwdriver with a flat-head. The screwdriver should be inserted into a small notch on the bottom of the key fob. Simply twist the screwdriver to separate the two halves. Remove the old CR2025 battery and replace it with a brand new one, making note of the position of the old one within the fob.
Examine the terminals for dirt or water damage prior to installing the new battery. If this is the case clean the terminals with some isopropyl ethanol. Also, make sure the pole cables are plugged in correctly. They must be connected to the negative and positive poles of your battery, respectively.
Diagnostics of a fault
If your Nissan Qashqai's keys fob stops working after being exposed to clean tap or rain water, this could be a sign there's a problem with the internal chip. Changing the battery won't fix the issue, and you'll need to purchase a new key fob. If the key fob stopped working after you dropped it, it's likely that the chip inside was damaged. It is usually possible to get the key fob back to function again if you take it out and clean the chip with alcohol and paper towels, then put it back in.
nissan micra key price that you may notice on your dashboard is "Key ID Not Correct." This means that the car is unable to recognize the key fob and not allow it to start the engine. This problem could be caused in numerous ways, including water damage, problems undetectable in the key fob circuitry or RFID interference.
If the battery that powers 12 volts in your key fob dead or not providing sufficient electric current, it will stop working. This will affect the Nissan Qashqai's remote keyless system central locking, as well as the capability to start the engine using the key fob. Check the battery in the key fob if you are not able to lock or unlock your door manually. You can also try replacing the battery to reset your transmitter.
Reprogramming
If the key fob was not submerged in saltwater it should be revived with a simple wash of clean water. You can also clean the electronic chip by using isopropyl or electronic cleaner. If none of these work it is possible to replace the key fob.
If your Nissan Intelligent Key is still not working, there could be a problem with the connection between it and the car. Start by pressing the ignition key, but without beginning the car. Continue to do this until the hazard light blinks twice. Then, turn off the vehicle and take off the key.
Open the fob compartment in your vehicle. It's usually on a door jamb, or the handle for the driver's door. Find the small button marked "program" and press it. You should hear a chime when the process is completed.
It's time to put your Intelligent Key to the test. Make sure you press all the buttons on the key while standing at a distance from the vehicle. If the lights flash and the horn squeaks this means that the key is successfully linked to the Nissan. It is also possible to test it in close proximity.